FAQ - atis TOP

How can the CAN-time be set with the atis TOP?

Connect the atis TOP to the clubset and authorize the system with the red key. With the up and down key choose the menu CAN TIME. Set date and time and confirm it.

........................................................................................................................

What to do, if the print out list will come up with several sheets and only one line printed on it?

There the configuration has to be changed in the atis TOP or the BENZING M1. Go to configuration and there by printer change the settings (standard, matrix by atis TOP and BENZING M1 or PC-simulation only by the BENZING M1).

.......................................................................................................................

How is it possible to see, if the internal clock from the CAN or the time from the atomic-clock is used to synchronize the atis TOP or M1?

By the atis TOP it will be shown in the right above corner from the display: "ex.cl." for the external atomic-clock "in.cl." for the internal CAN-clock. Also is there a check by using the CAN-clock, if the time is really right. By the M1, there is a message at the display if it was synchronized with the CAN or with the atomic-clock.

.......................................................................................................................

Do you have problems to buy the right printer for your M1, atis TOP and EXPRESS system?

Please download the printer-list which you will find by products-manuals. This list will be updatet constantly!

........................................................................................................................

During the update procedure I got a message stating that the update can not be completed successfully, so I restarted all and proceed to download the update in to my atis TOP again, and to my disappointment the clock quick functioning properly. The display is lighted but there are not any texts or symbols to be seen. Disconnected the clock from the power supply, waited about 20 minutes and reconnected the atis with the CNN alone then powered it on, and nothing, not the welcome screen to seen no beep sound, only screen that is back lighted. Is there any way for me to reset the clock?

No, however, if there is an interrupt by the download, then you cannot fix this problem yourself, you have to contact your agent.

Google SitemapSites we would recommend